%       (` |¯\ |    | ¯|¯ ¯|¯ |_¯ |¯\  \  / | |\ | |¯\ /¯\ \  /             
%\ W X \_) |¯¯ |__  |  |   |  |__ |¯\   VV  | | \| |_/ \_/  VV  . E R L   
%%—————————————————————————————————————————————————————————————————————
%%
%%   Copyright Ericsson AB 2008-2013. All Rights Reserved.
%%
%%——————————————————————————————————————————————
%% Whitespace Beautified by ScriptCulture © 2018
%% Sit Back · Feet Up · Learn wxErlang
%% For use as a reference only
%% www.scriptculture.com
%% Not check-summed 
%% wx 1.8 —————————————————————————————————————— 
%%
%% Licensed under the Apache License, 
%% Version 2.0 (the "License"); you may 
%% not use this file except in compliance 
%% with the License. You may obtain a copy 
%% of the License at:
%%
%%     http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by 
%% applicable law or agreed to in writing, software
%% distributed under the License is distributed 
%% on an "AS IS" BASIS, WITHOUT WARRANTIES 
%% OR CONDITIONS OF ANY KIND, either 
%% express or implied. See the 
%% License for the specific 
%% language governing 
%% permissions and
%% limitations 
%% under the 
%% License.
%%%%%%%
%%%%
%%%%%
%% @doc See external documentation: <a href="http://www.wxwidgets.org/manuals/2.8.12/wx_wxsplitterwindow.html">wxSplitterWindow</a>.
%% <p>This class is derived (and can use functions) from:
%% <br />{@link wxWindow}
%% <br />{@link wxEvtHandler}
%% </p>
%% @type wxSplitterWindow().  
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%   
%%   OVERVIEW
%%   ––––––––
%%   This class manages up to two subwindows. 
%%   
%%   The current view can be split into two programmatically 
%%   (perhaps from a menu command), and unsplit either 
%%   programmatically or via the wxSplitterWindow user interface.
%%   
%%   
%%   WINDOW STYLES
%%   —————————————
%%      wxSP_3D                Draws a 3D effect border and sash.
%%     
%%      wxSP_3DSASH            Draws a 3D effect sash.
%%     
%%      wxSP_3DBORDER          Synonym for wxSP_BORDER.
%%     
%%      wxSP_BORDER            Draws a standard border.
%%     
%%      wxSP_NOBORDER          No border (default).
%%     
%%      wxSP_NO_XP_THEME       Under Windows XP, switches off the attempt to draw the 
%%                             splitter using Windows XP theming, so the borders and 
%%                             sash will take on the pre-XP look.
%%     
%%      wxSP_PERMIT_UNSPLIT    Always allow to unsplit, even with the minimum 
%%                             pane size other than zero.
%%     
%%      wxSP_LIVE_UPDATE       Don't draw XOR line but resize the child windows immediately  
%% 
%%   
%%   
%%    EVENT HANDLING
%%    ——————————————
%%    To process input from a splitter control, use the following event handler 
%%    macros to direct input to member functions that take a wxSplitterEvent argument.
%%   
%%        EVT_SPLITTER_SASH_POS_CHANGING(id, func)  The sash position is in the process of being changed. 
%%                                                  May be used to modify the position of the tracking bar 
%%                                                  to properly reflect the position that would be set 
%%                                                  if the drag were to be completed at this point. 
%%                                                  Processes a wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGING event.
%%                                                  
%%        EVT_SPLITTER_SASH_POS_CHANGED(id, func)   The sash position was changed. 
%%                                                  May be used to modify the sash position before it is set, 
%%                                                  or to prevent the change from taking place. 
%%                                                  Processes a wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGED event.
%%                                                  
%%        EVT_SPLITTER_UNSPLIT(id, func)            The splitter has been just unsplit. 
%%                                                  Processes a wxEVT_COMMAND_SPLITTER_UNSPLIT event.
%%                                                  
%%        EVT_SPLITTER_DCLICK(id, func)             The sash was double clicked. 
%%                                                  The default behaviour is to unsplit the window 
%%                                                  when this happens (unless the minimum pane 
%%                                                  size has been set to a value greater than zero). 
%%                                                  Processes a wxEVT_COMMAND_SPLITTER_DOUBLECLICKED event. 
%%   
%%   
%%   
%%   See Also:
%%   —————————
%%   wxSplitterEvent
%%   
%%   
-module(wxSplitterWindow).
-include("wxe.hrl").
-export([
  create/2,create/3,destroy/1,getMinimumPaneSize/1,getSashGravity/1,
  getSashPosition/1,getSplitMode/1,getWindow1/1,getWindow2/1,initialize/2,
  isSplit/1,new/0,new/1,new/2,replaceWindow/3,setMinimumPaneSize/2,setSashGravity/2,
  setSashPosition/2,setSashPosition/3,setSashSize/2,setSplitMode/2,
  splitHorizontally/3,splitHorizontally/4,splitVertically/3,splitVertically/4,
  unsplit/1,unsplit/2,updateSize/1
  ]).

%% inherited exports
-export([cacheBestSize/2,captureMouse/1,center/1,center/2,centerOnParent/1,
  centerOnParent/2,centre/1,centre/2,centreOnParent/1,centreOnParent/2,
  clearBackground/1,clientToScreen/2,clientToScreen/3,close/1,close/2,
  connect/2,connect/3,convertDialogToPixels/2,convertPixelsToDialog/2,
  destroyChildren/1,disable/1,disconnect/1,disconnect/2,disconnect/3,
  enable/1,enable/2,findWindow/2,fit/1,fitInside/1,freeze/1,getAcceleratorTable/1,
  getBackgroundColour/1,getBackgroundStyle/1,getBestSize/1,getCaret/1,
  getCharHeight/1,getCharWidth/1,getChildren/1,getClientSize/1,getContainingSizer/1,
  getCursor/1,getDropTarget/1,getEventHandler/1,getExtraStyle/1,getFont/1,
  getForegroundColour/1,getGrandParent/1,getHandle/1,getHelpText/1,
  getId/1,getLabel/1,getMaxSize/1,getMinSize/1,getName/1,getParent/1,
  getPosition/1,getRect/1,getScreenPosition/1,getScreenRect/1,getScrollPos/2,
  getScrollRange/2,getScrollThumb/2,getSize/1,getSizer/1,getTextExtent/2,
  getTextExtent/3,getToolTip/1,getUpdateRegion/1,getVirtualSize/1,getWindowStyleFlag/1,
  getWindowVariant/1,hasCapture/1,hasScrollbar/2,hasTransparentBackground/1,
  hide/1,inheritAttributes/1,initDialog/1,invalidateBestSize/1,isEnabled/1,
  isExposed/2,isExposed/3,isExposed/5,isRetained/1,isShown/1,isTopLevel/1,
  layout/1,lineDown/1,lineUp/1,lower/1,makeModal/1,makeModal/2,move/2,
  move/3,move/4,moveAfterInTabOrder/2,moveBeforeInTabOrder/2,navigate/1,
  navigate/2,pageDown/1,pageUp/1,parent_class/1,popEventHandler/1,popEventHandler/2,
  popupMenu/2,popupMenu/3,popupMenu/4,raise/1,refresh/1,refresh/2,refreshRect/2,
  refreshRect/3,releaseMouse/1,removeChild/2,reparent/2,screenToClient/1,
  screenToClient/2,scrollLines/2,scrollPages/2,scrollWindow/3,scrollWindow/4,
  setAcceleratorTable/2,setAutoLayout/2,setBackgroundColour/2,setBackgroundStyle/2,
  setCaret/2,setClientSize/2,setClientSize/3,setContainingSizer/2,setCursor/2,
  setDropTarget/2,setExtraStyle/2,setFocus/1,setFocusFromKbd/1,setFont/2,
  setForegroundColour/2,setHelpText/2,setId/2,setLabel/2,setMaxSize/2,
  setMinSize/2,setName/2,setOwnBackgroundColour/2,setOwnFont/2,setOwnForegroundColour/2,
  setPalette/2,setScrollPos/3,setScrollPos/4,setScrollbar/5,setScrollbar/6,
  setSize/2,setSize/3,setSize/5,setSize/6,setSizeHints/2,setSizeHints/3,
  setSizeHints/4,setSizer/2,setSizer/3,setSizerAndFit/2,setSizerAndFit/3,
  setThemeEnabled/2,setToolTip/2,setVirtualSize/2,setVirtualSize/3,
  setVirtualSizeHints/2,setVirtualSizeHints/3,setVirtualSizeHints/4,
  setWindowStyle/2,setWindowStyleFlag/2,setWindowVariant/2,shouldInheritColours/1,
  show/1,show/2,thaw/1,transferDataFromWindow/1,transferDataToWindow/1,
  update/1,updateWindowUI/1,updateWindowUI/2,validate/1,warpPointer/3]).

-export_type([wxSplitterWindow/0]).
%% @hidden
parent_class(wxWindow) -> true;
parent_class(wxEvtHandler) -> true;
parent_class(_Class) -> erlang:error({badtype, ?MODULE}).

-type wxSplitterWindow()  ::  wx:wx_object().




           %·%% NEW %%·%

%%   
%%    Default constructor.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec new() -> wxSplitterWindow().

new() ->
         wxe_util:construct(?wxSplitterWindow_new_0,
             <<>>).


%% @equiv new(Parent, []) 
          -spec new(Parent)          -> wxSplitterWindow()
           when
           Parent :: wxWindow:wxWindow().

new(Parent)
           when 
           is_record(Parent, wx_ref) ->  new(Parent, []).


           %·%% NEW %%·%

%%   
%%   Constructor for creating the window.
%%   
%%      parent      The parent of the splitter window.
%%      
%%      id          The window identifier.
%%      
%%      pos         The window position.
%%      
%%      size        The window size.
%%      
%%      style       The window style. See wxSplitterWindow.
%%     
%%      name        The window name.
%%   
%%    After using this constructor, 
%%    you must create either one or two subwindows with 
%%   the splitter window as parent, and then call one of 
%%         wxSplitterWindow::Initialize, 
%%         wxSplitterWindow::SplitVertically and 
%%         wxSplitterWindow::SplitHorizontally 
%%                                           in order to set the pane(s).
%%   
%%   You can create two windows, with one hidden when not being shown; 
%%   or you can create and delete the second pane on demand.
%%   
%%   
%% Return Value:
%% See Also: wxSplitterWindow::Initialize, wxSplitterWindow::SplitVertically, wxSplitterWindow::SplitHorizontally, wxSplitterWindow::Create
%%*%%*%%
          -spec new(Parent, [Option]) -> wxSplitterWindow()
           when
           Parent  ::    wxWindow:wxWindow(),
           Option  :: {id,                         integer()}
                    | {pos,  {X :: integer(), Y :: integer()}}
                    | {size, {W :: integer(), H :: integer()}}
                    | {style,                      integer()}.

new(#wx_ref{type=ParentT,ref=ParentRef}, Options)
           when 
           is_list(Options) ->
                             ?CLASS(ParentT,wxWindow),
                   MOpts = fun({id, Id}, Acc) -> [<<1:32/?UI,Id:32/?UI>>|Acc];
                              ({pos,  {PosX, PosY}},  Acc) -> [<<2:32/?UI,PosX:32/?UI,PosY:32/?UI,0:32>>|Acc];
                              ({size, {SizeW,SizeH}}, Acc) -> [<<3:32/?UI,SizeW:32/?UI,SizeH:32/?UI,0:32>>|Acc];
                              ({style,       Style},  Acc) -> [<<4:32/?UI,Style:32/?UI>>|Acc];
                                               (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:construct(?wxSplitterWindow_new_2,
                                        <<ParentRef:32/?UI, 0:32,BinOpt/binary>>).




           %·%% CREATE %%·%

%%   
%% See below...
%% @equiv create(This,Parent, [])
          -spec create(This, Parent) -> boolean()
           when
           This   ::  wxSplitterWindow(), 
           Parent :: wxWindow:wxWindow().

create(This,Parent)
           when 
           is_record(This, wx_ref),
           is_record(Parent, wx_ref) -> create(This,Parent, []).

%%    
%%    Creation function, for two-step construction. See wxSplitterWindow::wxSplitterWindow for details.
%%
%% Return Value:
%% See Also:
%%*%%*%%
          -spec create(This, Parent, [Option]) -> boolean()
           when
           This    ::     wxSplitterWindow(), 
           Parent  ::    wxWindow:wxWindow(),
           Option  :: {id,                         integer()}
                    | {pos,  {X :: integer(), Y :: integer()}}
                    | {size, {W :: integer(), H :: integer()}}
                    | {style,                      integer()}.

create(#wx_ref{type=ThisT,ref=ThisRef},#wx_ref{type=ParentT,ref=ParentRef}, Options)
           when 
           is_list(Options) ->
                             ?CLASS(ThisT,wxSplitterWindow),
                             ?CLASS(ParentT,wxWindow),
                   MOpts = fun({id,             Id},  Acc) -> [<<1:32/?UI,Id:32/?UI>>|Acc];
                              ({pos,  {PosX, PosY}},  Acc) -> [<<2:32/?UI,PosX:32/?UI,PosY:32/?UI,0:32>>|Acc];
                              ({size, {SizeW,SizeH}}, Acc) -> [<<3:32/?UI,SizeW:32/?UI,SizeH:32/?UI,0:32>>|Acc];
                              ({style,       Style},  Acc) -> [<<4:32/?UI,Style:32/?UI>>|Acc];
                                               (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:call(?wxSplitterWindow_Create,
                                        <<ThisRef:32/?UI,ParentRef:32/?UI, BinOpt/binary>>).






           %·%% GET MINIMUM PANE SIZE %%·%

%%   
%%    Returns the current minimum pane size (defaults to zero).
%%   
%% Return Value:
%% See Also: wxSplitterWindow::SetMinimumPaneSize
%%*%%*%%
          -spec getMinimumPaneSize(This) -> integer()
           when
           This :: wxSplitterWindow().

getMinimumPaneSize(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                                     ?CLASS(ThisT,wxSplitterWindow),
                                       wxe_util:call(?wxSplitterWindow_GetMinimumPaneSize,
                                       <<ThisRef:32/?UI>>).





           %·%% GET SASH GRAVITY %%·%

%%   
%%    Returns the current sash gravity.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec getSashGravity(This) -> number()
           when
           This :: wxSplitterWindow().

getSashGravity(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                                 ?CLASS(ThisT,wxSplitterWindow),
                                   wxe_util:call(?wxSplitterWindow_GetSashGravity,
                                   <<ThisRef:32/?UI>>).





           %·%% GET SASH POSITION %%·%

%%   
%%    Returns the current sash position.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec getSashPosition(This) -> integer()
           when
           This :: wxSplitterWindow().

getSashPosition(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                                  ?CLASS(ThisT,wxSplitterWindow),
                                    wxe_util:call(?wxSplitterWindow_GetSashPosition,
                                    <<ThisRef:32/?UI>>).





           %·%% GET SPLIT MODE %%·%

%%   
%%    Gets the split mode.
%%   
%% Return Value:
%% See Also:
%%*%%*%%




%%<br /> Res = ?wxSPLIT_HORIZONTAL | ?wxSPLIT_VERTICAL
          -spec getSplitMode(This) -> wx:wx_enum()
           when
           This :: wxSplitterWindow().

getSplitMode(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                               ?CLASS(ThisT,wxSplitterWindow),
                                 wxe_util:call(?wxSplitterWindow_GetSplitMode,
                                 <<ThisRef:32/?UI>>).





           %·%% GET WINDOW 1 %%·%

%%   
%%    Returns the left/top or only pane.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec getWindow1(This) -> wxWindow:wxWindow()
           when
           This :: wxSplitterWindow().

getWindow1(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                             ?CLASS(ThisT,wxSplitterWindow),
                               wxe_util:call(?wxSplitterWindow_GetWindow1,
                               <<ThisRef:32/?UI>>).





           %·%% GET WINDOW 2 %%·%

%%   
%%    Returns the right/bottom pane.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec getWindow2(This) -> wxWindow:wxWindow()
           when
           This :: wxSplitterWindow().

getWindow2(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                             ?CLASS(ThisT,wxSplitterWindow),
                               wxe_util:call(?wxSplitterWindow_GetWindow2,
                               <<ThisRef:32/?UI>>).





           %·%% INITIALIZE %%·%

%%   
%%    Initializes the splitter window to have one pane. 
%%    The child window is shown if it is currently hidden.
%%
%%    This should be called if you wish to initially view only 
%%    a single pane in the splitter window.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec initialize(This, Window) -> ok
           when
           This   ::  wxSplitterWindow(), 
           Window :: wxWindow:wxWindow(). %          The pane for the unsplit window.

initialize(#wx_ref{type=ThisT,ref=ThisRef},
           #wx_ref{type=WindowT,ref=WindowRef}) ->
                                                 ?CLASS(ThisT,wxSplitterWindow),
                                                 ?CLASS(WindowT,wxWindow),
                                   wxe_util:cast(?wxSplitterWindow_Initialize,
                                   <<ThisRef:32/?UI,WindowRef:32/?UI>>).





           %·%% IS SPLIT %%·%

%%   
%%    Returns true if the window is split, false otherwise.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec isSplit(This) -> boolean()
           when
           This :: wxSplitterWindow().

isSplit(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                          ?CLASS(ThisT,wxSplitterWindow),
                            wxe_util:call(?wxSplitterWindow_IsSplit,
                            <<ThisRef:32/?UI>>).





           %·%% REPLACE WINDOW %%·%

%%   
%%   This function replaces one of the windows managed by the 
%%   wxSplitterWindow with another one. It is in general better 
%%   to use it instead of calling Unsplit() and then resplitting 
%%   the window back because it will provoke much less flicker (if any). 
%%   It is valid to call this function whether the splitter has 
%%   two windows or only one.
%%   
%%   Both parameters should be non-NULL and winOld must specify 
%%   one of the windows managed by the splitter. 
%%   If the parameters are incorrect or the window couldn't 
%%   be replaced, false is returned. Otherwise the function will 
%%   return true, but please notice that it will not delete 
%%   the replaced window and you may wish to do it yourself.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec replaceWindow(This, WinOld, WinNew) -> boolean()
           when
           This   ::  wxSplitterWindow(), 
           WinOld :: wxWindow:wxWindow(), 
           WinNew :: wxWindow:wxWindow().

replaceWindow(#wx_ref{type=ThisT,ref=ThisRef},
              #wx_ref{type=WinOldT,ref=WinOldRef},
              #wx_ref{type=WinNewT,ref=WinNewRef}) ->
                                                    ?CLASS(ThisT,wxSplitterWindow),
                                                    ?CLASS(WinOldT,wxWindow),
                                                    ?CLASS(WinNewT,wxWindow),
                                      wxe_util:call(?wxSplitterWindow_ReplaceWindow,
                                      <<ThisRef:32/?UI,WinOldRef:32/?UI,WinNewRef:32/?UI>>).





           %·%% SET SASH GRAVITY %%·%

%%   
%%    Sets the sash gravity. 
%%
%%   Gravity is real factor which controls position of 
%%   sash while resizing wxSplitterWindow. 
%%   
%%   Gravity tells wxSplitterWindow how much will 
%%   left/top window grow while resizing.
%%   
%%   Example values:
%%   
%%       0.0 - only the bottom/right window is automatically resized
%%       0.5 - both windows grow by equal size
%%       1.0 - only left/top window grows 
%%   
%%   Gravity should be a real value between 0.0 and 1.0.
%%   
%%   Default value of sash gravity is 0.0. 
%%   That value is compatible with previous 
%%   (before gravity was introduced) behaviour of wxSplitterWindow.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec setSashGravity(This, Gravity) -> ok
           when
           This    :: wxSplitterWindow(), 
           Gravity ::           number(). %  The sash gravity. Value between 0.0 and 1.0.

setSashGravity(#wx_ref{type=ThisT,ref=ThisRef}, Gravity)
           when 
           is_number(Gravity) ->
                               ?CLASS(ThisT,wxSplitterWindow),
                 wxe_util:cast(?wxSplitterWindow_SetSashGravity,
                 <<ThisRef:32/?UI,0:32,Gravity:64/?F>>).




           %·%% SET SASH POSITION %%·%

%%   
%% See below...
%% @equiv setSashPosition(This,Position, [])
          -spec setSashPosition(This, Position) -> ok
           when
           This     :: wxSplitterWindow(), 
           Position ::          integer().

setSashPosition(This,Position)
           when 
           is_record(This, wx_ref),
           is_integer(Position)                 -> setSashPosition(This,Position, []).

%%    
%%    Sets the sash position.
%%
%%     Does not currently check for an out-of-range value.
%% 
%% Return Value:
%% See Also: wxSplitterWindow::GetSashPosition
%%*%%*%%
          -spec setSashPosition(This, Position, [Option]) -> ok
           when
           This     :: wxSplitterWindow(), 
           Position ::          integer(),  %  The sash position in pixels.
           Option   :: {redraw, boolean()}. %  If true, resizes the panes and redraws the sash and border.

setSashPosition(#wx_ref{type=ThisT,ref=ThisRef}, Position, Options)
           when 
           is_integer(Position),
           is_list(Options) ->
                             ?CLASS(ThisT,wxSplitterWindow),
                   MOpts = fun({redraw, Redraw}, Acc) -> [<<1:32/?UI,(wxe_util:from_bool(Redraw)):32/?UI>>|Acc];
                                          (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:cast(?wxSplitterWindow_SetSashPosition,
                                        <<ThisRef:32/?UI,Position:32/?UI, BinOpt/binary>>).





           %·%% SET SASH SIZE %%·%

%%   
%%   Sets the sash size. 
%%   
%%   Normally, the sash size is determined according to 
%%   the metrics of each platform, but the application 
%%   can override this, for example to show a thin sash 
%%   that the user is not expected to drag. 
%%   
%%   If size is more -1, the custom sash size will be used.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec setSashSize(This, Width) -> ok
           when
           This  :: wxSplitterWindow(), 
           Width ::          integer().

setSashSize(#wx_ref{type=ThisT,ref=ThisRef}, Width)
           when 
           is_integer(Width) ->
                              ?CLASS(ThisT,wxSplitterWindow),
                wxe_util:cast(?wxSplitterWindow_SetSashSize,
                <<ThisRef:32/?UI,Width:32/?UI>>).





           %·%% SET MINIMUM PANE SIZE %%·%

%%   
%%   Sets the minimum pane size.
%%
%%
%%   The default minimum pane size is zero, which means that 
%%   either pane can be reduced to zero by dragging the sash, 
%%   thus removing one of the panes. To prevent this behaviour 
%%   (and veto out-of-range sash dragging), set a minimum size, 
%%   for example 20 pixels. If the wxSP_PERMIT_UNSPLIT style is 
%%   used when a splitter window is created, the window may be 
%%   unsplit even if minimum size is non-zero.
%%
%%   
%% Return Value:
%% See Also: wxSplitterWindow::GetMinimumPaneSize
%%*%%*%%
          -spec setMinimumPaneSize(This, Min) -> ok
           when
           This :: wxSplitterWindow(), 
           Min  ::          integer(). %  Minimum pane size in pixels.

setMinimumPaneSize(#wx_ref{type=ThisT,ref=ThisRef}, Min)
           when 
           is_integer(Min) ->
                            ?CLASS(ThisT,wxSplitterWindow),
              wxe_util:cast(?wxSplitterWindow_SetMinimumPaneSize,
              <<ThisRef:32/?UI,Min:32/?UI>>).





           %·%% SET SPLIT MODE %%·%

%%   
%%    Sets the split mode.
%%   
%%    Only sets the internal variable; does not update the display.
%%
%% Return Value:
%% See Also: wxSplitterWindow::GetSplitMode, wxSplitterWindow::SplitVertically, wxSplitterWindow::SplitHorizontally.
%%*%%*%%
          -spec setSplitMode(This, Mode) -> ok
           when
           This :: wxSplitterWindow(), 
           Mode ::          integer(). % Can be wxSPLIT_VERTICAL or wxSPLIT_HORIZONTAL.

setSplitMode(#wx_ref{type=ThisT,ref=ThisRef}, Mode)
           when 
           is_integer(Mode) ->
                             ?CLASS(ThisT,wxSplitterWindow),
               wxe_util:cast(?wxSplitterWindow_SetSplitMode,
               <<ThisRef:32/?UI,Mode:32/?UI>>).





           %·%% SPLIT HORIZONTALLY %%·%

%%   
%% See below...
%% @equiv splitHorizontally(This,Window1,Window2, [])
          -spec splitHorizontally(This, Window1, Window2) -> boolean()
           when
           This    ::  wxSplitterWindow(), 
           Window1 :: wxWindow:wxWindow(), 
           Window2 :: wxWindow:wxWindow().

splitHorizontally(This,Window1,Window2)
           when 
           is_record(This, wx_ref),
           is_record(Window1, wx_ref),
           is_record(Window2, wx_ref)                     -> splitHorizontally(This, Window1, Window2, []).

%%    
%%   Initializes the top and bottom panes of the splitter window. 
%%   The child windows are shown if they are currently hidden.
%%
%%   This should be called if you wish to initially view two panes. 
%%   It can also be called at any subsequent time, but the application 
%%   should check that the window is not currently split using IsSplit.
%%
%% Return Value: true if successful, false otherwise (the window was already split).
%% See Also:
%%*%%*%%
          -spec splitHorizontally(This, Window1, Window2, [Option]) -> boolean()
           when
           This    ::       wxSplitterWindow(), 
           Window1 ::      wxWindow:wxWindow(),  % The top pane.
           Window2 ::      wxWindow:wxWindow(),  % The bottom pane.
           Option  :: {sashPosition, integer()}. % The initial position of the sash. 
                                                 % If this value is positive, it specifies the size 
                                                 % of the upper pane. If it is negative, its absolute 
                                                 % value gives the size of the lower pane. 
                                                 % Finally, specify 0 (default) to choose the 
                                                 % default position (half of the total window height).

splitHorizontally(#wx_ref{type=ThisT,ref=ThisRef},
                  #wx_ref{type=Window1T,ref=Window1Ref},
                  #wx_ref{type=Window2T,ref=Window2Ref}, Options)
           when 
           is_list(Options) ->
                             ?CLASS(ThisT,wxSplitterWindow),
                             ?CLASS(Window1T,wxWindow),
                             ?CLASS(Window2T,wxWindow),
                   MOpts = fun({sashPosition, SashPosition}, Acc) -> [<<1:32/?UI,SashPosition:32/?UI>>|Acc];
                                                      (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:call(?wxSplitterWindow_SplitHorizontally,
                                        <<ThisRef:32/?UI,Window1Ref:32/?UI,Window2Ref:32/?UI, 0:32,BinOpt/binary>>).




           %·%% SPLIT VERTICALLY %%·%

%%   
%% See below...
%% @equiv splitVertically(This,Window1,Window2, [])
          -spec splitVertically(This, Window1, Window2) -> boolean()
           when
           This    ::  wxSplitterWindow(), 
           Window1 :: wxWindow:wxWindow(), 
           Window2 :: wxWindow:wxWindow().

splitVertically(This, Window1, Window2)
           when 
           is_record(This   , wx_ref),
           is_record(Window1, wx_ref),
           is_record(Window2, wx_ref)                   -> splitVertically(This, Window1, Window2, []).
%%
%%
%%
%%   Initializes the left and right panes of the splitter window. 
%%   The child windows are shown if they are currently hidden.
%%    
%%   This should be called if you wish to initially view two panes. 
%%   It can also be called at any subsequent time, but the application 
%%   should check that the window is not currently split using IsSplit.
%%
%% Return Value: true if successful, false otherwise (the window was already split).
%% See Also: wxSplitterWindow::SplitHorizontally, wxSplitterWindow::IsSplit, wxSplitterWindow::Unsplit.
%%*%%*%%
          -spec splitVertically(This, Window1, Window2, [Option]) -> boolean()
           when
           This    ::       wxSplitterWindow(), 
           Window1 ::      wxWindow:wxWindow(),  % The left pane.
           Window2 ::      wxWindow:wxWindow(),  % The right pane.
           Option  :: {sashPosition, integer()}. % The initial position of the sash. 
                                                 % If this value is positive, it specifies 
                                                 % the size of the left pane. 
                                                 % If it is negative, it is absolute value 
                                                 % gives the size of the right pane. 
                                                 % Finally, specify 0 (default) to choose the 
                                                 % default position (half of the total window width).

splitVertically(#wx_ref{type=ThisT,ref=ThisRef},
                #wx_ref{type=Window1T,ref=Window1Ref},
                #wx_ref{type=Window2T,ref=Window2Ref}, Options)
           when 
           is_list(Options) ->
                             ?CLASS(ThisT,wxSplitterWindow),
                             ?CLASS(Window1T,wxWindow),
                             ?CLASS(Window2T,wxWindow),
                   MOpts = fun({sashPosition, SashPosition}, Acc) -> [<<1:32/?UI,SashPosition:32/?UI>>|Acc];
                                                      (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:call(?wxSplitterWindow_SplitVertically,
                                        <<ThisRef:32/?UI,Window1Ref:32/?UI,Window2Ref:32/?UI, 0:32,BinOpt/binary>>).




           %·%% UNSPLIT %%·%

%%   
%% See below...
%% @equiv unsplit(This, [])
          -spec unsplit(This)      -> boolean()
           when
           This :: wxSplitterWindow().

unsplit(This)
           when 
           is_record(This, wx_ref) ->  unsplit(This, []).

%%    
%%    Unsplits the window.
%%
%%    This call will not actually delete the pane being removed; 
%%    it calls OnUnsplit which can be overridden for the desired behaviour. 
%%    By default, the pane being removed is hidden.
%%
%% Return Value: true if successful, false otherwise (the window was not split).
%% See Also: wxSplitterWindow::SplitHorizontally, wxSplitterWindow::SplitVertically, wxSplitterWindow::IsSplit, wxSplitterWindow::OnUnsplit
%%*%%*%%
          -spec unsplit(This, [Option]) -> boolean()
           when
           This    ::             wxSplitterWindow(),
           Option  :: {toRemove, wxWindow:wxWindow()}. % The pane to remove, 
                                                       % or NULL to remove the right or bottom pane.

unsplit(#wx_ref{type=ThisT,ref=ThisRef}, Options)
           when 
           is_list(Options) ->
                             ?CLASS(ThisT, wxSplitterWindow),
                   MOpts = fun({toRemove, #wx_ref{type=ToRemoveT,ref=ToRemoveRef}}, Acc) -> ?CLASS(ToRemoveT,wxWindow),[<<1:32/?UI,ToRemoveRef:32/?UI>>|Acc];
                                                                             (BadOpt, _) -> erlang:error({badoption, BadOpt})
                           end,
                   BinOpt = list_to_binary(lists:foldl(MOpts, [<<0:32>>], Options)),
                                        wxe_util:call(?wxSplitterWindow_Unsplit,
                                        <<ThisRef:32/?UI, 0:32,BinOpt/binary>>).





           %·%% UPDATE SIZE %%·%

%%   
%%   Causes any pending sizing of the sash and child 
%%   panes to take place immediately.
%%
%%   Such resizing normally takes place in idle time, 
%%   in order to wait for layout to be completed. 
%%   However, this can cause unacceptable flicker as the panes 
%%   are resized after the window has been shown. 
%%   To work around this, you can perform window layout 
%%   (for example by sending a size event to the parent window), 
%%   and then call this function, before showing the top-level window.
%%   
%% Return Value:
%% See Also:
%%*%%*%%
          -spec updateSize(This) -> ok
           when
           This :: wxSplitterWindow().

updateSize(#wx_ref{type=ThisT,ref=ThisRef}) ->
                                             ?CLASS(ThisT,wxSplitterWindow),
                               wxe_util:cast(?wxSplitterWindow_UpdateSize,
                               <<ThisRef:32/?UI>>).





           %·%% DESTROY %%·%

%%   
%%    Destroys the wxSplitterWindow and its children.   
%%
%% @doc Destroys this object, do not use object again
          -spec destroy( This :: wxSplitterWindow() ) -> ok.

destroy(Obj=#wx_ref{type=Type}) ->
                                 ?CLASS(Type,wxSplitterWindow),
                wxe_util:destroy(?DESTROY_OBJECT,Obj),
                ok.
 



%% From wxWindow




%% @hidden
warpPointer(This,X,Y) -> wxWindow:warpPointer(This,X,Y).
%% @hidden
validate(This) -> wxWindow:validate(This).
%% @hidden
updateWindowUI(This, Options) -> wxWindow:updateWindowUI(This, Options).
%% @hidden
updateWindowUI(This) -> wxWindow:updateWindowUI(This).
%% @hidden
update(This) -> wxWindow:update(This).
%% @hidden
transferDataToWindow(This) -> wxWindow:transferDataToWindow(This).
%% @hidden
transferDataFromWindow(This) -> wxWindow:transferDataFromWindow(This).
%% @hidden
thaw(This) -> wxWindow:thaw(This).
%% @hidden
show(This, Options) -> wxWindow:show(This, Options).
%% @hidden
show(This) -> wxWindow:show(This).
%% @hidden
shouldInheritColours(This) -> wxWindow:shouldInheritColours(This).
%% @hidden
setWindowVariant(This,Variant) -> wxWindow:setWindowVariant(This,Variant).
%% @hidden
setWindowStyleFlag(This,Style) -> wxWindow:setWindowStyleFlag(This,Style).
%% @hidden
setWindowStyle(This,Style) -> wxWindow:setWindowStyle(This,Style).
%% @hidden
setVirtualSizeHints(This,MinW,MinH, Options) -> wxWindow:setVirtualSizeHints(This,MinW,MinH, Options).
%% @hidden
setVirtualSizeHints(This,MinW,MinH) -> wxWindow:setVirtualSizeHints(This,MinW,MinH).
%% @hidden
setVirtualSizeHints(This,MinSize) -> wxWindow:setVirtualSizeHints(This,MinSize).
%% @hidden
setVirtualSize(This,X,Y) -> wxWindow:setVirtualSize(This,X,Y).
%% @hidden
setVirtualSize(This,Size) -> wxWindow:setVirtualSize(This,Size).
%% @hidden
setToolTip(This,Tip) -> wxWindow:setToolTip(This,Tip).
%% @hidden
setThemeEnabled(This,EnableTheme) -> wxWindow:setThemeEnabled(This,EnableTheme).
%% @hidden
setSizerAndFit(This,Sizer, Options) -> wxWindow:setSizerAndFit(This,Sizer, Options).
%% @hidden
setSizerAndFit(This,Sizer) -> wxWindow:setSizerAndFit(This,Sizer).
%% @hidden
setSizer(This,Sizer, Options) -> wxWindow:setSizer(This,Sizer, Options).
%% @hidden
setSizer(This,Sizer) -> wxWindow:setSizer(This,Sizer).
%% @hidden
setSizeHints(This,MinW,MinH, Options) -> wxWindow:setSizeHints(This,MinW,MinH, Options).
%% @hidden
setSizeHints(This,MinW,MinH) -> wxWindow:setSizeHints(This,MinW,MinH).
%% @hidden
setSizeHints(This,MinSize) -> wxWindow:setSizeHints(This,MinSize).
%% @hidden
setSize(This,X,Y,Width,Height, Options) -> wxWindow:setSize(This,X,Y,Width,Height, Options).
%% @hidden
setSize(This,X,Y,Width,Height) -> wxWindow:setSize(This,X,Y,Width,Height).
%% @hidden
setSize(This,Width,Height) -> wxWindow:setSize(This,Width,Height).
%% @hidden
setSize(This,Rect) -> wxWindow:setSize(This,Rect).
%% @hidden
setScrollPos(This,Orient,Pos, Options) -> wxWindow:setScrollPos(This,Orient,Pos, Options).
%% @hidden
setScrollPos(This,Orient,Pos) -> wxWindow:setScrollPos(This,Orient,Pos).
%% @hidden
setScrollbar(This,Orient,Pos,ThumbVisible,Range, Options) -> wxWindow:setScrollbar(This,Orient,Pos,ThumbVisible,Range, Options).
%% @hidden
setScrollbar(This,Orient,Pos,ThumbVisible,Range) -> wxWindow:setScrollbar(This,Orient,Pos,ThumbVisible,Range).
%% @hidden
setPalette(This,Pal) -> wxWindow:setPalette(This,Pal).
%% @hidden
setName(This,Name) -> wxWindow:setName(This,Name).
%% @hidden
setLabel(This,Label) -> wxWindow:setLabel(This,Label).
%% @hidden
setId(This,Winid) -> wxWindow:setId(This,Winid).
%% @hidden
setHelpText(This,Text) -> wxWindow:setHelpText(This,Text).
%% @hidden
setForegroundColour(This,Colour) -> wxWindow:setForegroundColour(This,Colour).
%% @hidden
setFont(This,Font) -> wxWindow:setFont(This,Font).
%% @hidden
setFocusFromKbd(This) -> wxWindow:setFocusFromKbd(This).
%% @hidden
setFocus(This) -> wxWindow:setFocus(This).
%% @hidden
setExtraStyle(This,ExStyle) -> wxWindow:setExtraStyle(This,ExStyle).
%% @hidden
setDropTarget(This,DropTarget) -> wxWindow:setDropTarget(This,DropTarget).
%% @hidden
setOwnForegroundColour(This,Colour) -> wxWindow:setOwnForegroundColour(This,Colour).
%% @hidden
setOwnFont(This,Font) -> wxWindow:setOwnFont(This,Font).
%% @hidden
setOwnBackgroundColour(This,Colour) -> wxWindow:setOwnBackgroundColour(This,Colour).
%% @hidden
setMinSize(This,MinSize) -> wxWindow:setMinSize(This,MinSize).
%% @hidden
setMaxSize(This,MaxSize) -> wxWindow:setMaxSize(This,MaxSize).
%% @hidden
setCursor(This,Cursor) -> wxWindow:setCursor(This,Cursor).
%% @hidden
setContainingSizer(This,Sizer) -> wxWindow:setContainingSizer(This,Sizer).
%% @hidden
setClientSize(This,Width,Height) -> wxWindow:setClientSize(This,Width,Height).
%% @hidden
setClientSize(This,Size) -> wxWindow:setClientSize(This,Size).
%% @hidden
setCaret(This,Caret) -> wxWindow:setCaret(This,Caret).
%% @hidden
setBackgroundStyle(This,Style) -> wxWindow:setBackgroundStyle(This,Style).
%% @hidden
setBackgroundColour(This,Colour) -> wxWindow:setBackgroundColour(This,Colour).
%% @hidden
setAutoLayout(This,AutoLayout) -> wxWindow:setAutoLayout(This,AutoLayout).
%% @hidden
setAcceleratorTable(This,Accel) -> wxWindow:setAcceleratorTable(This,Accel).
%% @hidden
scrollWindow(This,Dx,Dy, Options) -> wxWindow:scrollWindow(This,Dx,Dy, Options).
%% @hidden
scrollWindow(This,Dx,Dy) -> wxWindow:scrollWindow(This,Dx,Dy).
%% @hidden
scrollPages(This,Pages) -> wxWindow:scrollPages(This,Pages).
%% @hidden
scrollLines(This,Lines) -> wxWindow:scrollLines(This,Lines).
%% @hidden
screenToClient(This,Pt) -> wxWindow:screenToClient(This,Pt).
%% @hidden
screenToClient(This) -> wxWindow:screenToClient(This).
%% @hidden
reparent(This,NewParent) -> wxWindow:reparent(This,NewParent).
%% @hidden
removeChild(This,Child) -> wxWindow:removeChild(This,Child).
%% @hidden
releaseMouse(This) -> wxWindow:releaseMouse(This).
%% @hidden
refreshRect(This,Rect, Options) -> wxWindow:refreshRect(This,Rect, Options).
%% @hidden
refreshRect(This,Rect) -> wxWindow:refreshRect(This,Rect).
%% @hidden
refresh(This, Options) -> wxWindow:refresh(This, Options).
%% @hidden
refresh(This) -> wxWindow:refresh(This).
%% @hidden
raise(This) -> wxWindow:raise(This).
%% @hidden
popupMenu(This,Menu,X,Y) -> wxWindow:popupMenu(This,Menu,X,Y).
%% @hidden
popupMenu(This,Menu, Options) -> wxWindow:popupMenu(This,Menu, Options).
%% @hidden
popupMenu(This,Menu) -> wxWindow:popupMenu(This,Menu).
%% @hidden
popEventHandler(This, Options) -> wxWindow:popEventHandler(This, Options).
%% @hidden
popEventHandler(This) -> wxWindow:popEventHandler(This).
%% @hidden
pageUp(This) -> wxWindow:pageUp(This).
%% @hidden
pageDown(This) -> wxWindow:pageDown(This).
%% @hidden
navigate(This, Options) -> wxWindow:navigate(This, Options).
%% @hidden
navigate(This) -> wxWindow:navigate(This).
%% @hidden
moveBeforeInTabOrder(This,Win) -> wxWindow:moveBeforeInTabOrder(This,Win).
%% @hidden
moveAfterInTabOrder(This,Win) -> wxWindow:moveAfterInTabOrder(This,Win).
%% @hidden
move(This,X,Y, Options) -> wxWindow:move(This,X,Y, Options).
%% @hidden
move(This,X,Y) -> wxWindow:move(This,X,Y).
%% @hidden
move(This,Pt) -> wxWindow:move(This,Pt).
%% @hidden
makeModal(This, Options) -> wxWindow:makeModal(This, Options).
%% @hidden
makeModal(This) -> wxWindow:makeModal(This).
%% @hidden
lower(This) -> wxWindow:lower(This).
%% @hidden
lineUp(This) -> wxWindow:lineUp(This).
%% @hidden
lineDown(This) -> wxWindow:lineDown(This).
%% @hidden
layout(This) -> wxWindow:layout(This).
%% @hidden
isTopLevel(This) -> wxWindow:isTopLevel(This).
%% @hidden
isShown(This) -> wxWindow:isShown(This).
%% @hidden
isRetained(This) -> wxWindow:isRetained(This).
%% @hidden
isExposed(This,X,Y,W,H) -> wxWindow:isExposed(This,X,Y,W,H).
%% @hidden
isExposed(This,X,Y) -> wxWindow:isExposed(This,X,Y).
%% @hidden
isExposed(This,Pt) -> wxWindow:isExposed(This,Pt).
%% @hidden
isEnabled(This) -> wxWindow:isEnabled(This).
%% @hidden
invalidateBestSize(This) -> wxWindow:invalidateBestSize(This).
%% @hidden
initDialog(This) -> wxWindow:initDialog(This).
%% @hidden
inheritAttributes(This) -> wxWindow:inheritAttributes(This).
%% @hidden
hide(This) -> wxWindow:hide(This).
%% @hidden
hasTransparentBackground(This) -> wxWindow:hasTransparentBackground(This).
%% @hidden
hasScrollbar(This,Orient) -> wxWindow:hasScrollbar(This,Orient).
%% @hidden
hasCapture(This) -> wxWindow:hasCapture(This).
%% @hidden
getWindowVariant(This) -> wxWindow:getWindowVariant(This).
%% @hidden
getWindowStyleFlag(This) -> wxWindow:getWindowStyleFlag(This).
%% @hidden
getVirtualSize(This) -> wxWindow:getVirtualSize(This).
%% @hidden
getUpdateRegion(This) -> wxWindow:getUpdateRegion(This).
%% @hidden
getToolTip(This) -> wxWindow:getToolTip(This).
%% @hidden
getTextExtent(This,String, Options) -> wxWindow:getTextExtent(This,String, Options).
%% @hidden
getTextExtent(This,String) -> wxWindow:getTextExtent(This,String).
%% @hidden
getSizer(This) -> wxWindow:getSizer(This).
%% @hidden
getSize(This) -> wxWindow:getSize(This).
%% @hidden
getScrollThumb(This,Orient) -> wxWindow:getScrollThumb(This,Orient).
%% @hidden
getScrollRange(This,Orient) -> wxWindow:getScrollRange(This,Orient).
%% @hidden
getScrollPos(This,Orient) -> wxWindow:getScrollPos(This,Orient).
%% @hidden
getScreenRect(This) -> wxWindow:getScreenRect(This).
%% @hidden
getScreenPosition(This) -> wxWindow:getScreenPosition(This).
%% @hidden
getRect(This) -> wxWindow:getRect(This).
%% @hidden
getPosition(This) -> wxWindow:getPosition(This).
%% @hidden
getParent(This) -> wxWindow:getParent(This).
%% @hidden
getName(This) -> wxWindow:getName(This).
%% @hidden
getMinSize(This) -> wxWindow:getMinSize(This).
%% @hidden
getMaxSize(This) -> wxWindow:getMaxSize(This).
%% @hidden
getLabel(This) -> wxWindow:getLabel(This).
%% @hidden
getId(This) -> wxWindow:getId(This).
%% @hidden
getHelpText(This) -> wxWindow:getHelpText(This).
%% @hidden
getHandle(This) -> wxWindow:getHandle(This).
%% @hidden
getGrandParent(This) -> wxWindow:getGrandParent(This).
%% @hidden
getForegroundColour(This) -> wxWindow:getForegroundColour(This).
%% @hidden
getFont(This) -> wxWindow:getFont(This).
%% @hidden
getExtraStyle(This) -> wxWindow:getExtraStyle(This).
%% @hidden
getEventHandler(This) -> wxWindow:getEventHandler(This).
%% @hidden
getDropTarget(This) -> wxWindow:getDropTarget(This).
%% @hidden
getCursor(This) -> wxWindow:getCursor(This).
%% @hidden
getContainingSizer(This) -> wxWindow:getContainingSizer(This).
%% @hidden
getClientSize(This) -> wxWindow:getClientSize(This).
%% @hidden
getChildren(This) -> wxWindow:getChildren(This).
%% @hidden
getCharWidth(This) -> wxWindow:getCharWidth(This).
%% @hidden
getCharHeight(This) -> wxWindow:getCharHeight(This).
%% @hidden
getCaret(This) -> wxWindow:getCaret(This).
%% @hidden
getBestSize(This) -> wxWindow:getBestSize(This).
%% @hidden
getBackgroundStyle(This) -> wxWindow:getBackgroundStyle(This).
%% @hidden
getBackgroundColour(This) -> wxWindow:getBackgroundColour(This).
%% @hidden
getAcceleratorTable(This) -> wxWindow:getAcceleratorTable(This).
%% @hidden
freeze(This) -> wxWindow:freeze(This).
%% @hidden
fitInside(This) -> wxWindow:fitInside(This).
%% @hidden
fit(This) -> wxWindow:fit(This).
%% @hidden
findWindow(This,Winid) -> wxWindow:findWindow(This,Winid).
%% @hidden
enable(This, Options) -> wxWindow:enable(This, Options).
%% @hidden
enable(This) -> wxWindow:enable(This).
%% @hidden
disable(This) -> wxWindow:disable(This).
%% @hidden
destroyChildren(This) -> wxWindow:destroyChildren(This).
%% @hidden
convertPixelsToDialog(This,Sz) -> wxWindow:convertPixelsToDialog(This,Sz).
%% @hidden
convertDialogToPixels(This,Sz) -> wxWindow:convertDialogToPixels(This,Sz).
%% @hidden
close(This, Options) -> wxWindow:close(This, Options).
%% @hidden
close(This) -> wxWindow:close(This).
%% @hidden
clientToScreen(This,X,Y) -> wxWindow:clientToScreen(This,X,Y).
%% @hidden
clientToScreen(This,Pt) -> wxWindow:clientToScreen(This,Pt).
%% @hidden
clearBackground(This) -> wxWindow:clearBackground(This).
%% @hidden
centreOnParent(This, Options) -> wxWindow:centreOnParent(This, Options).
%% @hidden
centreOnParent(This) -> wxWindow:centreOnParent(This).
%% @hidden
centre(This, Options) -> wxWindow:centre(This, Options).
%% @hidden
centre(This) -> wxWindow:centre(This).
%% @hidden
centerOnParent(This, Options) -> wxWindow:centerOnParent(This, Options).
%% @hidden
centerOnParent(This) -> wxWindow:centerOnParent(This).
%% @hidden
center(This, Options) -> wxWindow:center(This, Options).
%% @hidden
center(This) -> wxWindow:center(This).
%% @hidden
captureMouse(This) -> wxWindow:captureMouse(This).
%% @hidden
cacheBestSize(This,Size) -> wxWindow:cacheBestSize(This,Size).
 %% From wxEvtHandler
%% @hidden
disconnect(This,EventType, Options) -> wxEvtHandler:disconnect(This,EventType, Options).
%% @hidden
disconnect(This,EventType) -> wxEvtHandler:disconnect(This,EventType).
%% @hidden
disconnect(This) -> wxEvtHandler:disconnect(This).
%% @hidden
connect(This,EventType, Options) -> wxEvtHandler:connect(This,EventType, Options).
%% @hidden
connect(This,EventType) -> wxEvtHandler:connect(This,EventType).